• <tbody id="ggq8w"></tbody>
    <label id="ggq8w"><xmp id="ggq8w">
    • <td id="ggq8w"></td>
  • Here's the page we think you wanted. See search results instead:

    Latest White Papers

    (View All)

    White Papers 2022.05.06

    4 Essential Methods for Creating and Editing Waveforms

    4 Essential Methods for Creating and Editing Waveforms

    This white paper covers four essential methods for creating and editing waveforms using the Keysight Trueform Series waveform generator: editing on the front panel, using Excel, using Keysight’s PathWave BenchVue software, and using MATLAB

    2022.05.06

    White Papers 2022.05.05

    Multisignal Capture and Analysis with DMMs

    Multisignal Capture and Analysis with DMMs

    Design engineers are often time-constrained and do not necessarily want to spend time on extraneous activities. When a design is ready for a test, they need the results fast without all the pain of test setups, hardware and software configurations, test executions, collection of data, and report generation.Do you know that you can perform multisignal digital multimeter measurements effortlessly and quickly without all of the pain mentioned above? Learn from this white paper how to use Keysight PathWave BenchVue software and Keysight Truevolt series DMM to make simultaneous voltage and current drain measurements on your device under test.

    2022.05.05

    White Papers 2022.05.05

    Using a Waveform Generator to Create a Pseudorandom Binary Sequence Signal

    Using a Waveform Generator to Create a Pseudorandom Binary Sequence Signal

    This white paper outlines how you can overcome various test challenges using a waveform generator to create pseudorandom binary sequence signals. Learn how to simulate noise in a variety of frequency bandwidths and perform acoustic testing of a structure. Also covered is the stimulus process for eye pattern testing.

    2022.05.05

    White Papers 2022.05.05

    7 Steps to Improve Your DMM Measurement Throughput

    7 Steps to Improve Your DMM Measurement Throughput

    As a test engineer, you will want to create a digital multimeter (DMM) measurement process that saves you test time. The benefits of increasing your benchtop multimeter measurement throughput are:? Increase manufacturing output and optimize shippable revenue? Optimize test equipment usage and efficiency? Reduce test footprint and capital cost? Reduce product development test timeIn this white paper, you will learn all the seven steps on how to increase your DMM’s testing speed to improve its overall measurement throughput:1. Auto-zeroing2. Simplify changes during testing3. Optimize range variations4. Optimize power line integration settings5. AC settings and settling time6. Turning off unnecessary functions7. Optimize trigger delays

    2022.05.05

    White Papers 2022.05.05

    Eliminate Potential Measurement Errors and Achieve the Greatest Accuracy in Digital Multimeters

    Eliminate Potential Measurement Errors and Achieve the Greatest Accuracy in Digital Multimeters

    When making measurements with a digital multimeter (DMM), common errors such as signal interference, external noise, and internal current leakage will cause measurement errors. Understanding the root cause of these errors will help you eliminate and achieve the greatest accuracy possible using a benchtop multimeter.This white paper helps you to uncover several sources of system cabling and DC voltage measurement errors, such as:? Radio frequency interference? Thermal EMF errors? Noise caused by magnetic fields? Noise caused by ground loops? Common mode rejection? Noise caused by injected current? Loading errors due to input resistance? Loading errors due to input bias currentIt also covers ways to overcome the above errors to get the accuracy you need.

    2022.05.05

    White Papers 2022.05.05

    Measuring Low Current Consumption with a Digital Multimeter

    Measuring Low Current Consumption with a Digital Multimeter

    One of the essential functions a digital multimeter (DMM) has is the current measurement. New generation DMMs now have expanded current ranges that will give you better measurement resolution, allowing you to make more accurate low-current measurements.This white paper teaches how to make accurate low-level current measurements by overcoming errors due to system-related offsets and burden voltage. You will also learn to make dynamic current measurements using Keysight DMM’s digitizing measurement capability and PathWave BenchVue DMM PC application software.

    2022.05.05

    White Papers 2022.05.05

    Waveform Generators Increase Design Efficiency

    Waveform Generators Increase Design Efficiency

    Waveform sequencing and frequency lists are unique to Trueform Series waveform generators. These capabilities make arb signal generation more flexible and workflow more efficient. With PathWave BenchVue Waveform Builder Pro, you get advanced signal-creation and editing capabilities without spending hours programming.

    2022.05.05

    White Papers 2022.05.05

    Stress Testing Your Device with Simulated Waveforms

    Stress Testing Your Device with Simulated Waveforms

    Digital components and circuits must be able to withstand a certain amount of noise and jitter in clock and data signals to ensure the reliable operation of your device. If they do not, the result could be communication errors or system failures. Noise, jitter, cross talk, and reflections can cause signal distortions. Transient signal spikes can appear to be valid clocks, or the receiving system might misinterpret data. Such effects cause system failures. The design must minimize distortions to ensure accurate and reliable operation. Therefore, engineers need to stress their devices with these kinds of distortions during design, validation, and production. Stress testing provides valuable insight into the performance of your device under extreme load. Identifying the potential breaking points in your application will allow you to correct them before they become expensive production issues. Engineers must test the limits of their designs to ensure that the products achieve ideal maximum performance and the new hardware meets design specifications across the full range of operations. This white paper discusses the importance of stress testing and explains how to use a function generator to simulate the waveform and stress test your device.

    2022.05.05

    White Papers 2022.05.05

    Complex Modulation Generation with Benchtop Function Generators

    Complex Modulation Generation with Benchtop Function Generators

    The Keysight 33500B / 33600A Series Trueform waveform / function generators create high-quality baseband and IF/RF modulation signals. The Series Trueform waveform / function generator offer "true-arb" architectures, which allow users to obtain image-free signals, and select the best frequency and transient response for a given application.

    2022.05.05

    White Papers 2022.05.04

    Investigate Interference Issues in the Field with RTSA - FieldFox

    Investigate Interference Issues in the Field with RTSA - FieldFox

    Interference is everywhere, no matter the network you're operating on. This white paper discusses common sources of interference, where traditional spectrum analysis falls short, and how RTSA aids in detecting interference.

    2022.05.04

    White Papers 2022.05.04

    4 Tips for 5G New Radio Signal Creation

    4 Tips for 5G New Radio Signal Creation

    5G NR require you to think differently about how you design and test devices. Learn the four tips to help you successfully generate 5G NR test signals to get your designs to market faster.

    2022.05.04

    White Papers 2022.05.04

    IQ Signal Generation Made Easy

    IQ Signal Generation Made Easy

    This white paper will cover how to generate both ideal and non-ideal IQ signals. We will use the Keysight 33500B and 33600A Trueform Series waveform generators with the IQ Signal Player option to show you how to do this.

    2022.05.04

    Latest Case Studies

    (View All)

    Case Studies 2022.04.26

    Improves USB-C? Interconnects Compliance Test Time by >90%

    Improves USB-C? Interconnects Compliance Test Time by >90%

    Learn how a high-speed digital cables product manufacturer achieved fast and efficient test time at an affordable price to test their USB Type-C? cables using Keysight Automated Interconnects Test Solution.

    2022.04.26

    Case Studies 2022.04.24

    Progressing Chip Technology Manufacturing

    Progressing Chip Technology Manufacturing

    Deliver the field-ready cyber pros the world needs now. Prepare students for rapid success with the cyber range based on BreakingPoint, the real-world threat simulation platform.

    2022.04.24

    Case Studies 2022.04.20

    Leading Healthcare Provider Eliminates Millions in HIPAA Compliance Fines with Keysight Security Visibility Fabric

    Leading Healthcare Provider Eliminates Millions in HIPAA Compliance Fines with Keysight Security Visibility Fabric

    A large regional healthcare provider was able to use Keysight Security Visibility to help provide them the data access and protection needed to avoid $1.5 Million in Annual HIPAA compliance violation fines.

    2022.04.20

    Case Studies 2022.04.19

    Large Retail Pharmacy

    Large Retail Pharmacy

    Keysight Visibility helps optimize tool utilization, and reduced MTTR at large retail pharmacy chain.

    2022.04.19

    Case Studies 2022.04.19

    Service Provider Secures Network, Blocks Threats, and Boosts Efficiency

    Service Provider Secures Network, Blocks Threats, and Boosts Efficiency

    Ixia gave this large European service provider the opportunity to run the ThreatARMOR intelligence gateway in passive mode on their production network, to demonstrate exactly what the appliance could do to identify and block suspicious traffic.

    2022.04.19

    Case Studies 2022.04.15

    High Availability Security Upgrade

    High Availability Security Upgrade

    Multi-national financial services corporation uses Ixia visibility solutions to achieve high availability while upgrading their network security and network monitoring.

    2022.04.15

    Case Studies 2022.04.14

    Cook Children’s Healthcare System Improves Application Experience Using Network Intelligence

    Cook Children’s Healthcare System Improves Application Experience Using Network Intelligence

    Cook Children's Health Care System is a not-for-profit, nationally recognized pediatric health care organization that operates a medical center, physician network, hospital, pediatric surgery center and health plan. Founded in 1918 and based in Fort Worth, Texas, the integrated system has more than 60 primary and specialty care offices throughout North Texas. They needed to improve their network visibility and monitoring practices to solve application performance and SPAN port contention issues. Read this case study to learn how they reduced their mean time to repair for network issues from days to hours and increased monitoring tool efficiency.

    2022.04.14

    Case Studies 2022.04.13

    Engineering Service in Public Cloud Gets Security Upgrade

    Engineering Service in Public Cloud Gets Security Upgrade

    A government agency providing engineering services migrated key applications and services to public cloud infrastructure. As part of the migration, the agency needed to deploy a robust security architecture to protect applications and data from cyberattacks. The Chief of Information Security knew that traffic flowing to, from, and between their virtual servers would need to be monitored closely for intrusions and data breaches.

    2022.04.13

    Case Studies 2022.04.13

    Customer Secures Their Network from Cradle to Grave

    Customer Secures Their Network from Cradle to Grave

    Read how the financial institution used Ixia's BreakingPoint solution and visibility architecture together to strengthen their network defenses and create a resilient Security Fabric.

    2022.04.13

    Case Studies 2022.04.13

    Case Study: Multicast Gap Detection

    Case Study: Multicast Gap Detection

    In this case study, you will read about the impact that the deployment of Keysight's TradeVision had and the unexpected benefits it brought to the data provider.

    2022.04.13

    Case Studies 2022.04.13

    A Logistics Firm Saves Money and Speeds up Mean Time to Repair 80%

    A Logistics Firm Saves Money and Speeds up Mean Time to Repair 80%

    See how this customer increased network visibility and reduced MTTR while saving money at the same time.

    2022.04.13

    Case Studies 2022.04.13

    Changing Compliance Mandates Drive an Urgent Need for Inline Security Solutions

    Changing Compliance Mandates Drive an Urgent Need for Inline Security Solutions

    Read this case study to see how the customer implemented an inline Security Fabric which saved them $3 Million on inline firewall and IPS deployments.

    2022.04.13

    Latest eBooks

    (View All)

    eBooks 2022.04.19

    Build Your Power Supply Skill Set

    Build Your Power Supply Skill Set

    Learn these 4 tips to help you get more from your power supply and build your power supply skill set.

    2022.04.19

    eBooks 2022.04.19

    Build Your Power Supply Skill Set – Part 2

    Build Your Power Supply Skill Set – Part 2

    This eBook supplements the first set of power skills and provides 4 additional tips to build your power supply skill set. Learn more.

    2022.04.19

    eBooks 2022.03.22

    The 5 C's + 1 of IoT

    The 5 C's + 1 of IoT

    Many individuals and organizations use IoT devices to increase productivity and profit. While IoT devices offer great convenience, having large numbers of them in a small space increases complexity in device design, test, performance, and security. Testing these devices is one of the biggest challenges today’s design engineers and device manufacturers face. Learn about testing the 5 C's + 1 C of IoT:? Connectivity? Continuity? Compliance? Coexistence? Cybersecurity? Customer experienceEnsure that your complex IoT device reaches the pinnacle of its performance limit through this eBook.

    2022.03.22

    eBooks 2022.03.17

    A Strategic Guide to Salesforce Testing

    A Strategic Guide to Salesforce Testing

    This eBook highlights best practices for Salesforce testing to ensure the platform supports your organization so users can meet business objectives after every update, upgrade, and implementation.

    2022.03.17

    eBooks 2022.03.15

    Improve Yield and Reduce Risk with the ABCs of Test Accuracy

    Improve Yield and Reduce Risk with the ABCs of Test Accuracy

    Your test equipment accuracy drives product quality and profit. Learn the ABCs of a new era in test, test risk basics, ways to calculate risk and calibrate, calibrate, calibrate!

    2022.03.15

    eBooks 2022.03.10

    Delivering a Seamless Omnichannel Experience with Test Automation

    Delivering a Seamless Omnichannel Experience with Test Automation

    Intelligent automated end-to-end testing is helping retailers enhance their IT infrastructure to support a smoother user journey, quick and simple checkout experiences, and secure integrations for POS, inventory management, and payment systems.

    2022.03.10

    eBooks 2022.03.09

    Simplify Your Proof of Concepts and Support Services with a Test Partner

    Simplify Your Proof of Concepts and Support Services with a Test Partner

    Incomplete testing during POCs can lead to doubts from enterprise technology buyers. Set yourself apart by proactively providing one for them. Download this eBook to see how you can leverage a testing and validation partner to close deals quicker.

    2022.03.09

    eBooks 2022.02.02

    Four Considerations for High-speed Digital Design Success

    Four Considerations for High-speed Digital Design Success

    High-speed digital standards are quickly evolving to keep pace with the data demand from emerging technologies. In this eBook, learn the four key considerations you need to know to realize successful, holistic high-speed digital designs.

    2022.02.02

    eBooks 2022.02.02

    Four Secrets to Mastering Millimeter-Wave Communications Circuit Design

    Four Secrets to Mastering Millimeter-Wave Communications Circuit Design

    In this eBook, you will learn four EDA secrets to mastering mmWave communications circuit design and how to streamline your design workflow to achieve first-pass success.

    2022.02.02

    eBooks 2022.01.26

    Five Simple Strategies to Connect and Secure Your Network – A Practical Guide to Dynamic Network Intelligence

    Five Simple Strategies to Connect and Secure Your Network – A Practical Guide to Dynamic Network Intelligence

    Next-generation networks demand next-generation solutions. That’s why network architects rely on dynamic network intelligence to delve beneath the surface of their networks and applications. A combination of packet-level intelligence, cutting-edge data processing, and active performance monitoring, dynamic network intelligence delivers predictive insights to help you answer your most vexing questions.

    2022.01.26

    eBooks 2022.01.25

    10 Things You Must Know Before Buying Your Next Benchtop Digital Multimeter

    10 Things You Must Know Before Buying Your Next Benchtop Digital Multimeter

    This eBook explores 10 things that you should know about digital multimeters and the key specs you need to consider before buy a digital multimeter.

    2022.01.25

    eBooks 2022.01.18

    Geek to Guru Guide: Eliminating Network Blind Spots

    Geek to Guru Guide: Eliminating Network Blind Spots

    Creating a zero-loss network visibility architecture will help you avoid dangerous blind spots and quickly identify network vulnerabilities. Partial visibility is not enough so don’t settle for anything less than the full picture.

    2022.01.18

    Latest Solution Briefs

    (View All)

    Solution Briefs 2022.05.06

    LiveAction and Keysight - Respond Faster with Enhanced Packet and Flow Analysis

    LiveAction and Keysight - Respond Faster with Enhanced Packet and Flow Analysis

    LiveAction and Keysight deliver real-time, continuous insight into network traffic based on application and user-level activity. Seamless integration of comprehensive analytics and intelligent visibility reduces time and effort while improving accuracy and response times.

    2022.05.06

    Solution Briefs 2022.05.05

    Satellite Test Solution for Field and Lab Applications

    Satellite Test Solution for Field and Lab Applications

    Learn how to install, maintain, and troubleshoot satellite ground stations and end-user terminals that support satellite networks. Our brief describes a portable, accurate RF satellite test solution based on the FieldFox microwave analyzer. It verifies the performance of amplifiers, frequency converters, over-the-air (OTA) signal quality, transmit power, and more.

    2022.05.05

    Solution Briefs 2022.04.29

    F9681A Manufacturing Chamber

    F9681A Manufacturing Chamber

    The F9681A manufacturing chamber is a compact solution for testing 5G mmWave devices

    2022.04.29

    Solution Briefs 2022.04.21

    Beamformer IC Test Solutions

    Beamformer IC Test Solutions

    Keysight’s comprehensive suite of beamformer IC test solutions enables 5G component manufacturers to address challenges introduced by beamforming technology. By using a variety of hardware and software combined with Keysight’s new modulation distortion application, beamfomer IC and FEM manufacturers can accurately, quickly and cost-effectively measure wideband modulated signals.

    2022.04.21

    Solution Briefs 2022.04.19

    Automotive Ethernet Channel Test

    Automotive Ethernet Channel Test

    Unlike other technology such as CAN, LIN or MOST in the automotive, Automotive Ethernet demands rigorous compliance verification. The requirements include complex measurements that, until recently, have been uncommon in the automotive industry. The channel between all or any harness such as cables, connectors bundled together can be create a point of failure which must be fully tested to meet Automotive Ethernet channel specification. To help you save time and effort, Guidant offers customized solutions that automate the testing with Keysight.

    2022.04.19

    Solution Briefs 2022.04.19

    Compact Temperature Controlled Probe Station for Research and Development

    Compact Temperature Controlled Probe Station for Research and Development

    Temperature and atmospheric effects can cause dramatic changes in electrical system characteristics and performance. Characterizing these environmental effects is a crucial step in advancing academic research and product development. Furthermore, spectrometer and microscope measurements may be performed alongside electrical testing to fully characterize a device, which requires a very small form factor and optical access from both sides. The HCP-PM series of miniature probe stages from Instec Inc, paired with Keysight electrical analysis systems, offer a total solution to these problems.

    2022.04.19

    Solution Briefs 2022.04.18

    Solving for Common Low Resistance Measurement Accuracy Issues

    Solving for Common Low Resistance Measurement Accuracy Issues

    A 4-wire measurement method is the most accurate method to measure small resistances, especially in ranges below 100 ohms. The 4-wire method eliminates measurement errors that long leads and switches introduce in your test setups. The method is also very useful when you need to monitor for accurate and precise temperature changes.This solution brief will compare the differences between making a 2-wire and a 4-wire resistance measurement. The 4-wire resistance measurement method offers a more accurate way to measure small resistance than the 2-wire method. However, there are trade-offs. The brief will also explore several applications that need to use a 4-wire measurement method. You can typically use a digital multimeter (DMM), a micro-ohm meter, or a source-measure meter to conduct a 2-wire and 4-wire resistance measurements. By the end of the brief, you will be able to make the right decision and investment for your test setup.

    2022.04.18

    Solution Briefs 2022.04.05

    Testing Performance and Security in Distributed Networks With CyPerf

    Testing Performance and Security in Distributed Networks With CyPerf

    Today’s distributed cloud demands that security devices perform in zero trust networks. See how CyPerf validates application performance and security efficacy of end-to-end zero trust architectures.

    2022.04.05

    Solution Briefs 2022.04.01

    RSA NetWitness and Ixia Solution Brief

    RSA NetWitness and Ixia Solution Brief

    RSA NetWitness and Ixia Solution Brief.

    2022.04.01

    Solution Briefs 2022.04.01

    Bricata + Ixia: Visibility for Simplified Threat Hunting

    Bricata + Ixia: Visibility for Simplified Threat Hunting

    Ixia’s network visibility architecture works with Bricata’s Comprehensive Network Protection Platform to capture and analyze network traffic to detect and address security threats on any size network. This easy to read solution brief describes the scalable joint solution for recognizing cyber attacks and providing complete context around alerts so issues can be mitigated quickly.

    2022.04.01

    Solution Briefs 2022.03.28

    When Digital Experience Meets Cyber Security

    When Digital Experience Meets Cyber Security

    Providing customers a secure online environment, while a creating positive experience, will be an important differentiator for your business. Combine Keysight Breakingpoint and Eggplant for a winning solution.

    2022.03.28

    Solution Briefs 2022.03.28

    The Network Performance Impact on Customer Experience

    The Network Performance Impact on Customer Experience

    Brand loyalty is slowing down, but brand experience is alive! Since we transact via apps and websites, this makes it awfully hard to create amazing brand experiences. Keysight Technologies offers a unique solution allowing you to measure your customer’s digital experience while emulating accurate network conditions that occur over live production networks.

    2022.03.28

    Latest Brochures

    (View All)

    Brochures 2022.05.01

    Distribution Products Catalog May 1, 2022

    Distribution Products Catalog May 1, 2022

    The Keysight Distribution Catalog provides an overview of Keysight products sold through distributors with K.com links for more detailed information. This is the May 1, 2022 version of the catalog’s bi-annual publication.

    2022.05.01

    Brochures 2022.04.19

    Understanding the Needs of Today's Financial Networks

    Understanding the Needs of Today's Financial Networks

    The combination of Ixia's network testing and network visibility solutions provides a unique network partner that can ensure your financial network at all stages - from design, to deployment, to production.

    2022.04.19

    Brochures 2022.04.13

    Nemo Handy

    Nemo Handy

    Nemo Handy is a solution for thorough and advanced measurement and optimization of wireless air interface and mobileapplication Quality-of-Service and Quality-of-Experience.

    2022.04.13

    Brochures 2022.04.13

    Nemo Walker Air

    Nemo Walker Air

    Nemo Walker Air is solution for performing indoor measurements and benchmarking.

    2022.04.13

    Brochures 2022.04.13

    Ixia’s Guide to Network Visibility Terms and Acronyms

    Ixia’s Guide to Network Visibility Terms and Acronyms

    This guide is intended to give you a quick and easy reference to common network visibility and monitoring terms along with their meanings.

    2022.04.13

    Brochures 2022.04.13

    Ixia’s Guide to Network Security Terms and Acronyms

    Ixia’s Guide to Network Security Terms and Acronyms

    This guide is intended to give you a quick and easy reference to common security terms and their meanings.

    2022.04.13

    Brochures 2022.04.01

    Solutions for Every Service at Every Stage

    Solutions for Every Service at Every Stage

    Download the brochure, “Solutions for Every Service at Every Stage,” to see how Ixia helps you speed delivery and streamline operation of compelling new services during every phase of your product lifecycle.

    2022.04.01

    Brochures 2022.03.23

    X-Series Measurement Applications

    X-Series Measurement Applications

    Address changing measurement needs with over 25 signal analysis applications for cellular communications, wireless connectivity, digital video, and general purpose measurements.

    2022.03.23

    Brochures 2022.03.14

    Pathwave Signal Generation

    Pathwave Signal Generation

    Signal Studio reduces the time you spend on signal generation with Keysight's performance optimized signals and signal creation software. Learn more in this brochure.

    2022.03.14

    Brochures 2022.02.17

    FieldFox Handheld Analyzer Software

    FieldFox Handheld Analyzer Software

    This brochure discusses the common software option bundles for FieldFox according to application. See how you can configure your unit to meet your test needs.

    2022.02.17

    Brochures 2022.02.11

    Electronic Warfare Test and Evaluation Solutions

    Electronic Warfare Test and Evaluation Solutions

    Keysight Technologies provides complete end-to-end solutions for designing, testing and verifying EW System Under Test. We’re stepping forward as a commercial collaborator, creating and delivering the rapidly adaptable EW solutions you need to succeed far into the future. We will work with your team to ensure enhanced realism and greater confidence in test and evaluation.

    2022.02.11

    Brochures 2022.01.27

    Nemo Cloud

    Nemo Cloud

    Nemo Cloud connects a wide range of Nemo products into a unique end-to-end online service enabling remote access and control of Keysight′s Nemo measurements and analytic solutions as well as more efficient data sharing between users.

    2022.01.27

    Latest Catalogs

    (View All)

    Catalogs 2022.04.13

    Bench Power Supply Products Catalog

    Bench Power Supply Products Catalog

    Keysight E3600 Series Basic DC Power Supplies are an affordable family of power supplies with many models, including programmable units ideal for basic applications and bench use.

    2022.04.13

    Catalogs 2022.01.24

    Keysight Basic Instruments January 2022

    Keysight Basic Instruments January 2022

    This catalog contains Keysight Basic Instruments through January 2022 and includes new limited-time offers.

    2022.01.24

    Catalogs 2022.01.23

    Keysight Basic Instruments January 2022

    Keysight Basic Instruments January 2022

    This catalog contains Keysight Basic Instruments through January 2022 and includes new limited-time offers.

    2022.01.23

    Catalogs 2022.01.13

    IoT Device Battery Life Test Solutions Catalog

    IoT Device Battery Life Test Solutions Catalog

    Finding the optimal balance between battery protocol and software functionality to get reliable performance and service life requires an in-depth understanding of battery life and current drain. With its many current and power measurement technology patents, Keysight Technologies has extensive experience in making these measurements. Let’s explore Keysight’s hardware and software test solutions that can help extend the battery life in your designs.

    2022.01.13

    Catalogs 2021.11.19

    Data Center High-Speed Computing Products Catalog

    Data Center High-Speed Computing Products Catalog

    This document provides an overview of Keysight High-Speed Computing Solutions, including PCI Express, DDR test, and USB transmitter and receiver test.

    2021.11.19

    Catalogs 2021.11.18

    RF Products Catalog

    RF Products Catalog

    Learn about essential RF tools, and explore Keysight’s signal generators, spectrum analyzers, network analyzers, and more.

    2021.11.18

    Catalogs 2021.11.10

    Software for Automotive Applications Solutions Catalog

    Software for Automotive Applications Solutions Catalog

    Behind Keysight’s high-precision hardware lies powerful software designed to fuel innovation by streamlining automotive electronics test. Whether you need to analyze and generate standards-compliant automotive radar signals, simulate multiple driving scenarios, or perform end-to-end security testing, explore Keysight’s automotive software solutions.

    2021.11.10

    Catalogs 2021.11.03

    Network Visibility Products Catalog

    Network Visibility Products Catalog

    Network visibility enables you to keep performance high and security tight. Learn more and explore Keysight network packet brokers, bypass switches, taps, and fabric controller.

    2021.11.03

    Catalogs 2021.11.01

    Signal Analysis Solutions Catalog

    Signal Analysis Solutions Catalog

    Keysight signal analysis solutions help you overcome test challenges from basic general purpose RF to leading-edge microwave designs. Find out which hardware and software best meet your needs.

    2021.11.01

    Catalogs 2021.10.11

    High-Performance Digital Products Catalog

    High-Performance Digital Products Catalog

    Today’s laboratory requires best-in-class measurement and stimulus tools to help validate tests now and in the future. Learn more about the oscilloscope, arbitrary waveform generator and BERT products available from Keysight.

    2021.10.11

    Catalogs 2021.08.26

    PathWave Design and Test Software Catalog

    PathWave Design and Test Software Catalog

    Accelerate your design and test workflow with Keysight’s PathWave software. Increase your productivity with automation and simulation software; extend the capabilities of your test equipment with test software, and innovate anywhere with PC and web-based software. Find out more about PathWave design and test software in this catalog.

    2021.08.26

    Catalogs 2021.06.29

    PXI / AXIe Modular Products Catalog

    PXI / AXIe Modular Products Catalog

    Keysight modular PXI and AXIe test solutions help you test highly integrated devices with speed and accuracy. Find out which hardware and software best meet your needs and see time-saving document test solutions for specific measurement applications.

    2021.06.29

    Catalogs 2021.06.14

    Engineering Essentials Oscilloscopes Catalog

    Engineering Essentials Oscilloscopes Catalog

    Whether you use a scope once a day, once a week, or once a month, InfiniiVision scopes are ready to inspire quicker insight.

    2021.06.14

    Catalogs 2021.05.12

    EXR-Series Catalog

    EXR-Series Catalog

    This catalog covers all of the Infiniium EXR-Series oscilloscopes, their capabilities and much more, giving you the chance to see if an EXR-Series oscilloscope is a good fit for your needs and applications. With eight models ranging in performance from 500 MHz to 2.5 GHz, four or eight channels, and dozens of hardware and software options, the Infiniium EXR-Series is powerful, easy to own, and intuitive to use. Find answers to: Why consider an EXR? Specifications and features, the EXR-Series portfolio, and easy application support for general-purpose debug, power integrity test and measurement, switch-mode power (SMPS) testing, and serial bus testing.

    2021.05.12

    Catalogs 2021.05.11

    Network Analyzer Products Catalog

    Network Analyzer Products Catalog

    Market-leading Keysight network analyzers help you characterize passive devices to leading-edge microwave designs. Find out which hardware and software best meet your needs.

    2021.05.11

    Catalogs 2021.05.10

    Power Supply and Analyzer Rental Products Catalog

    Power Supply and Analyzer Rental Products Catalog

    The widespread adoption of hybrid-electric vehicles (HEV) and electric vehicles (EV) has pushed theadvancement of EV battery technologies to become more economically viable. Learn about technology advancements and challenges automotive manufacturers face today.

    2021.05.10

    Catalogs 2021.05.04

    Education Solutions Catalog

    Education Solutions Catalog

    Catalog for Keysight products used in education solutions for students and educators / researchers.

    2021.05.04

    Catalogs 2021.04.26

    Digital Multimeter Products Catalog

    Digital Multimeter Products Catalog

    This 11-page DMM Product Catalog features the Truevolt Series 6?- and 7?- Digit Bench Digital Multimeters, PXI Digital Multimeters, Specialty Digital Multimeters, and Handheld DMMs.

    2021.04.26

    Catalogs 2021.04.26

    Waveform and Function Generator Solutions Catalog

    Waveform and Function Generator Solutions Catalog

    The Keysight Waveform and Function Generator Solutions Catalog features general purpose function generators with basic arbitrary waveform capabilities, as well as Trueform signal generation technology with superior signal fidelity providing the highest resolution, lowest distortion and lowest jitter when compared to DDS function/arbitrary waveform generators.

    2021.04.26

    Catalogs 2021.04.23

    Bench and Power Products Catalog

    Bench and Power Products Catalog

    Today’s designs are increasingly portable and connected. Troubleshooting DC to RF technologies requires a variety of instruments, and Keysight offers the deepest bench in the industry.

    2021.04.23

    Catalogs 2021.04.15

    High-Volume Traffic Generator Products Catalog

    High-Volume Traffic Generator Products Catalog

    Get the highest performance and most realistic workloads to validate across the stack from protocols to services, applications, and cybersecurity. Explore Keysight high-volume traffic generators.

    2021.04.15

    Catalogs 2021.03.26

    Signal Generation Solutions Catalog

    Signal Generation Solutions Catalog

    Keysight offers a wide range of instruments to help you generate the signals required to effectively test your device. Meet your design objectives with our selection of analog, RF, and leading-edge microwave signal generators and software.

    2021.03.26

    Catalogs 2021.03.23

    High-Performance Digital Rental Products Catalog

    High-Performance Digital Rental Products Catalog

    Today’s laboratory requires best-in-class measurement and stimulus tools to help validate tests now and in the future. Learn more about the oscilloscope, arbitrary waveform generator and BERT products available from Keysight.

    2021.03.23

    Catalogs 2021.03.03

    Smart Bench Essentials Series Products Catalog

    Smart Bench Essentials Series Products Catalog

    Keysight's Smart Bench Essentials Series is a connected solution of test instruments consisting of a power supply, function generator, digital multimeter, and an oscilloscope. With this new complete portfolio of instruments, students, and general electronic test engineers will have a truly connected, modern design solution for their lab or test workbenches.

    2021.03.03

    Latest Application Notes

    (View All)

    Application Notes 2022.05.05

    Using a Function/Arbitrary Waveform Generator to Generate Pulses

    Using a Function/Arbitrary Waveform Generator to Generate Pulses

    Function generators offer quite a bit of flexibility for creating pulses from simple modified square waves to arbitrary waveforms. Some function generators may even have special hardware added to generate very accurate pulses. For high-speed pulse applications, a dedicated pulse generator will be necessary and will offer additional features for creating pulses.

    2022.05.05

    Application Notes 2022.05.05

    Precise Cable and Antenna Measurement Techniques in the Field

    Precise Cable and Antenna Measurement Techniques in the Field

    This application note covers the practical techniques of cable and antenna testing. Learn the easy way to measure return loss and VSWR in a field or lab setting with FieldFox.

    2022.05.05

    Application Notes 2022.05.04

    Waveform Sequencing with PathWave BenchVue Waveform Builder Pro

    Waveform Sequencing with PathWave BenchVue Waveform Builder Pro

    The application note covers how to implement waveform sequencing using 33503A PathWave BenchVue Waveform Builder Pro, supported by Keysight 33500B and 33600A Series Trueform waveform generators.

    2022.05.04

    Application Notes 2022.04.29

    VSA 89600 Direct Data Connectivity Console Example

    VSA 89600 Direct Data Connectivity Console Example

    This application note is a demo guide for the example program that shows the user how to configure the VSA’s .NET API to use direct data input to 89600 VSA. Working through the entire console demo is achieved by the user responding to prompts in the console window. This demo guide will explain every step in detail.

    2022.04.29

    Application Notes 2022.04.29

    VSA 89600 Direct Data Connectivity WPF Example

    VSA 89600 Direct Data Connectivity WPF Example

    This application note is a demo guide for the example program that shows the user how to configure the VSA’s .NET API to use direct data input to 89600 VSA. All configurations are done through the GUI with concise steps for the user to follow.

    2022.04.29

    Application Notes 2022.04.26

    Achieving Test Coverage Assurance using PathWave Manufacturing Analytics

    Achieving Test Coverage Assurance using PathWave Manufacturing Analytics

    Quality is King. Producing quality products is the biggest goal in manufacturing and an uncompromised option. Quality is being considered in each stage of the product lifecycle, from design to early validation, and to mass-production testing. Engineers developed tests with the best test coverage to ensure all defective products remained in the factory. Keysight’s PathWave Manufacturing Analytics (PMA), an Industry 4.0 real-time big data analytics solution, not only helps improve manufacturing efficiency but more importantly provides actionable insights to manufacturers to ensure that the quality of test is never compromised in the manufacturing line.

    2022.04.26

    Application Notes 2022.04.26

    All-States Method for PDL or PER Synchronous Polarization Scrambler

    All-States Method for PDL or PER Synchronous Polarization Scrambler

    Explanation and programming for all-states measurement of PDL or PER

    2022.04.26

    Application Notes 2022.04.25

    Fixture Reusability Consideration From In-line to Offline

    Fixture Reusability Consideration From In-line to Offline

    This application note describes the differences between the i3070 Series 5 inline 4 module test system (E9986E) fixture and the offline 4 module test system fixture, as well as the fixture reusability considerations.

    2022.04.25

    Application Notes 2022.04.20

    Over-the-Air Performance Measurement - 5G

    Over-the-Air Performance Measurement - 5G

    This application note discusses the challenges RF engineers face when deploying 5G on mmWave and how the Fieldfox analyzer meets those challenges.

    2022.04.20

    Application Notes 2022.04.20

    Evaluating Battery Drain N6700 Series Modular Power Supplies

    Evaluating Battery Drain N6700 Series Modular Power Supplies

    You can measure and analyze the short– and long-term battery drain using the Keysight N6705C DC power analyzer and any of the N6700 Series SMUs with the BV9200B PathWave BenchVue advanced power control and analysis software. You can use the actual battery instead of a DC source to power battery-powered devices for real-time results.

    2022.04.20

    Application Notes 2022.04.19

    How to Ensure That Your Product Complies with IEC61000-4-11 Standards

    How to Ensure That Your Product Complies with IEC61000-4-11 Standards

    This application note describes how the Keysight AC6900 can help you ensure that your new product complies with IEC standard 61000-4-11 and passes rigorous field testing

    2022.04.19

    Application Notes 2022.04.19

    How to Optimize Power Supply Testing Using the Keysight N6790 Series

    How to Optimize Power Supply Testing Using the Keysight N6790 Series

    The Keysight N6790 Series electronic load modules give you unmatched performance and speed for power supply test. For bench or system applications in any testing environment, you can count on high quality and reliability with superior performance and features.

    2022.04.19

    Want help or have questions?